Head (before)

Kristyna — SIMUL8 Community Forum

Head (after)

Ask the SIMUL8 Community

Kristyna

Content (before)

Content (1)

Kristyna

Hi - clear

About

Username
Kristyna
Joined
Visits
12
Last Active
Roles
Verified, Forum member, Moderator
Points
5

Comments

  • Hi Alasdair, This is a high resolution issue and can be fixed by changing some settings. Try the below: https://www.simul8.com/support/help/doku.php?id=troubleshoot:regerrorco
  • Hi Kumar, if I understand it correctly, you want to change the order in which the work items enter activity 2? Firstly, I would maybe think about how useful this is because you would probably really want work to come in the right order, otherwise y…
  • Hello Vincent, I think the issue will be with how you are selecting the work items. The function "Move work item to" will only impact the 'current work item' which would normally be the one that triggered the logic, unless you change it b…
  • Hi jbomarques, It sounds like you will have to split that logic into 2. You will start by sending 20% to queue A and 80% to a dummy queue. After the queue, there would be a dummy activity which would have a routing out logic to set to circulate/pri…
  • Hello Stefan, if your spreadsheet changes depending on your label, I would recommend that all the spreadsheets have the same name with the only difference being a number at the end (which would correspond to the label values). You will then have to…
  • Hello Maike, It sounds like you are only looking at the results directly in the queues. Those will only show the last run. If you'd like to see the results from each run, you will have to save the result to your Results manager (which is really the…
  • Hello Carrie0988, There is a variable collect in the newer version of SIMUL8. I found a video here: https://www.youtube.com/watch?v=O2b7y0gzFoE https://www.simul8.com/support/help/doku.php?id=features:variable_collect This would probably work bett…
  • Hello Simul8or, I am not quite sure I understand exactly how your model works but in general: If you want your resource travel with a work item where your train picks up a work item at an activity (WC) and then continues with that work item until …
  • Hello, I assume that what you mean by SIMUL8 dashboard is the KPI manager that pops up at the end of trial? You can disable the window popping up by using the Visual Logic command display results summary (see below). (Image) You should be able t…

Content (after)